Details
| Field | Value |
| Project ID | An integer specifying the project ID |
| Project Name | The project name |
| Date | The date the project was created in MM/DD/YYYY HH:MM:SS Time format |
| Owner | The name and email of the project owner |
| Collector Build version | The build version of the collector that generated the first Collector run in the project. |
| Data Points Definitions KB Article | A link to this KB. |
| Disclaimer | A disclaimer that shows that all units listed on the excel are Base 10 Units and that all extracted base 2 values from ASUPs are converted into Base 10 as well. |
KPIs
| Parameter | Value |
|
Metric:
|
These values are the maximum observed values from the date range of ASUPs collected:
Active Tier Total Post-Comp (TB):The Physical capacity of the Data Domain Active Tier after Total Compression in TBs. (After full Reduction) Active Tier Total Pre-Comp (TB): The logical capacity injected into the Data Domain Active Tier (Protected capacity) Active Tier Total Reduction (X:1): Active Tier Total data reduction ratio after performing local and Global Compression. Active Tier Utilization: The percentage of the capacity used on the Active Tier after data is finally written on DD. Cloud Tier Total Post-Comp (TB): The full capacity of the Data Domain Cloud Tier after Total Compression in TiBs. Cloud Tier Total Pre-Comp (TB): The full capacity of the Data Domain Cloud Tier before being written to the DD cloud Tier. Before deduplication. Cloud Tier Total Reduction (X:1): The reduction ratio on the cloud tier. Cloud Tier Utilization: The percentage of the physical capacity used on the Cloud Tier after data is finally written.
Read Streams: The number of active read streams as reported on SYSTEM SHOW PERFORMANCE LEGACY VIEW table. Read Streams +: reopened read streams in past 30 seconds. Write streams: The number of Active write streams. Write streams +: reopened write streams to the DD in past 30 seconds. Replication In Streams: number of incoming replication streams Replication Out Streams: The number of outgoing replication streams. Total Streams: The total number of Read and Write streams opened on the Data domain. Read Throughput (MB/s): The read Throughput. Throughput Read data includes NFS, CIFS, DD Boost over IP and Fibre Channel, VTL, Replication, DD Boost-managed replication and optimized duplication. Write Throughput (MB/s): The write throughput data to the Data domain. Throughput Write data includes NFS, CIFS, DD Boost over IP and Fibre Channel, VTL, Replication, DD Boost-managed replication and optimized duplication Replication Pre-Comp In/Out (MB/s): Replication pre-compressed (logical) throughput into and out of the Data Domain system. The value is always zero for collection replication. Replication Network In/Out (MB/s): Network replication throughput into and out of the Data Domain system. Active Mtrees – Read: Mtrees Active Read as reported on SYSTEM SHOW PERFORMANCE LEGACY VIEW table. Active Mtrees – Write: Mtrees Active write as reported on SYSTEM SHOW PERFORMANCE LEGACY VIEW table. |
| Peak Value | Corresponding Maximum Value for the above KPIs. |
| Date | The date for which the value is captured in terms of MM/DD/YYYY HH:MM:SS |
General
| Field | Value |
| Description |
Active Tier Logical Size (TB):The Active Tier size value before Compression is applied. Protected Pre-Comp size. Active Tier Post-Comp Consumed (TB): The Physically consumed Active Tier size after the compression and as reported after the last cleaning on the system. Active Tier Post-Comp Size (TB): The Physical full current size of the Active Tier. Active Tier Reduction (X:1): The ratio of the reduction done (Deduplication and Compression). Active Tier Utilization: The percentage of the Active Tier Post-Comp consumed.
Cloud Tier Logical Size (TB): The Cloud Tier Protected Size. Cloud Tier Post-Comp Consumed (TB): The consumed Physical Cloud Tier size after the total compression. Cloud Tier Post-Comp Size (TB): Post-comp size is based on the CLOUDTIER-CAPACITY license and might not match what is reported by the cloud storage provider. Cloud Tier Reduction (X:1): The ratio of the reduction done on Cloud Tier. Cloud Tier Utilization: The percentage of the Cloud Tier Post-Comp consumed. Cloud Tier Utilization – Metadata: The utilization percentage of the Cloud Tier metadata Tier. filesys show space tier cloud local-metadata
DNS Servers: Lists the IP(s) of the DNS server(s) connected to the Data Domain. NTP Server: the IP/GQDN of the NTP server to which the DD is synced. SMTP Server: The name of the SMTP server configured on the DD. Default Gateway: The IP of the default gateway to which the DD connects/reachable over network.
Garbage Collection Last Start: the date and time the last Active Tier cleaning started in terms of MM/DD/YYYY HH:MM:SS Garbage Collection Last Success: The date and time the last Active Tier cleaning was successfully completed in terms of MM/DD/YYYY HH:MM:SS. Garbage Collection Schedule: the schedule configured to start Active Tier cleaning in terms of (Day at HH:MM) Garbage Collection Throttle: The throttling percentage configured for the cleaning.
Licensing Schemes: The Scheme parameter shows the type of Licensing used. The scheme for a physical system is EMC Electronic License Management System (ELMS) node-locked mode. Supported schemes for DDVE include node-locked mode and served mode. Total System Memory (GB): The total Memory utilized on the system in GB. Rack Units Including Head: The number of Rack units on the DD server. DDOE (TB): Data Domain Operating Environment. This represents a snapshot of the shelves and/or DAEs nested under a TLA in terms of their capacity. Raw Capacity in Head (TB):The raw capacity in the DD head unit in TiBs SSDs in E30 Shelf: the number of SSDs in ES30 shelf. HDDs in Head Unit: The number of HDDs in the Head Unit. SSDs in Head Unit: The number of SSDs in the Head Unit.
File System Status: the Status of the DD File system depending on how long it has been up and running, status will be running or not running if reported the same. Admin Email: The Email of Administrator if configured with SMTP. Chassis Serial No: The Serial Number of the DD chassis. Cloud Type: The type of the Cloud if the DD is a virtual edition and deployed in cloud. Data Encryption Enabled: A Boolean Flag if set to yes means enabling the Data Encryption on the DD level. Generated Epoch time: The Epoch time of the report generation: (number of seconds since 12:00am January 1, 1970) Generated On: Translated Epoch time in a friendly user date and time for the latest ASUP for that DD server.
HA Enabled: A Boolean Flag specifying if High Availability is enabled on the system. HA Mode: Specifies the mode of the High availability if enabled on the DD. HA Peer IP: gives the IP of the 2nd Data domain system that is configured as HA for this system. HA Role: specifies which is the Active and which is the passive system. HA Sysid: specifies the ID of the HA Peer for that system
Hostname: specifies the hostname of the DD SYSTEM analyzed. HW Revision: specifies the Hardware version of the DD system Hypervisor Type: Specifies the Hypervisor type if that is DDVE. Location: Specifies the location of the DD system Model No: specifies the model number of that DD system Node UUID: specifies the UUID of the DD system SSD Shelf Present: a Boolean flag specifies if there is SSD shelf existing or not for that system Service Tag: specifies the DD System Service Tag System Serial No: specifies the DD serial Number. System SWID: specifies the System SWID. Time Zone: specifies the local Time Zone for the DD server location. TPM Device Info: specifies the chip used as TPM. The TPM field exists on DD OS 7.x auto support logs to account for the hardware differences between newer models that use PowerEdge servers and to show the type of TPM device used on these chips, and older non PowerEdge models. Uptime: Provides the amount of Time this DD has been up since the last reboot or start of the system. Vendor ID: Provides the Vendor ID. Version: Provides The DDOS version |
| Value | The corresponding value to the above criteria. |
Feature Licenses
| Field | Value |
| License | The name of the License assigned to the DD |
| Count | The number of Licenses assigned per each License Type |
| Type | The type of that License if evaluation or permanent. |
| State | The status of the License if Active or Grace |
| Expiration Date | The expiry date of the license else N/A |
| Note | Gives a note if the License is expired else empty if not expired. |
IP connections
| Field | Value |
| Port | NIC port name |
| Speed | Speed of the NIC Port |
| Mac Address | The MAC address of that NIC port |
| IPv4 Address | The IP of that NIC port |
| IPv6 Address | The IP version 6 address for that NIC port |
| Connection Type | Fiber or Ethernet (copper) connection type. |
| Status | The status of the NIC if Yes or No or unknown. |
| State | The state of the NIC port if running or down |
| Duplex | Specifies if this is Full or half duplex or unknown. |
| Supported Speeds | The speeds supported on each NIC. |
| MTU | The Maximum Transfer Unit size for packets transmitted on that NIC. |
| Gateway | Gateway connected to that NIC. |
| Additional Information | Any informatic message over the NIC status, bonding or failover. |
| IfGroup | Specifies the ifgroup to which the NIC port belongs. |
| Rx Bytes (GB) | The amount of GBs received on that NIC port |
| Tx Bytes (GB) | The amount of GBs Transmitted from that NIC port. |
| Rx Errors | Number of Reception Errors reported on that NIC port if any. |
| Tx Errors | Number of Transmission errors reported on that NIC Port if any. |
Active Tier
| Field | Value |
| Hostname | The FQDN of the DD server. |
| Serial Number | The serial Number of the DD server. |
| Model | The Hardware Model of the DD server |
| ASUP Date | The dates of all ASUPs collected to list the Active Tier history. |
| Code Level | DDOS version |
| Pre-Comp Size (TB) | The logical Capacity protected by the DD. |
| Post-Comp Used (TB) | Consumed Physical capacity. |
| Post-Comp Size (TB) | The Total capacity of the Active Tier including Used and Available Post-Comp capacity. |
| Utilization % | Percentage of Amount of space physically utilized from the Post-Comp Size. |
| Reduction (X:1) | Active Tier Total data reduction ratio after performing local and Global Compression |
| 24 Hour Pre-Comp TB | Past 24 Hours reported Logical Protected Capacity. |
| 24 Hour Post-Comp TB | The Total capacity of the Active Tier including Used and Available Post-Comp capacity within the past 24 hours |
| 24 Hour Total-Comp (X:1) | The ratio of the total reduction reported for the past 24 hrs. |
| Cleanable (TB) | The Cleanable TBs to be cleaned/reclaimed space within the coming cleaning process. |
| 1 day | capacity occupied by backups with retention 1 Day. |
| 1 week | capacity occupied by backups with retention 1 Week. |
| 2 weeks | capacity occupied by backups with retention 2 weeks. |
| 1 month | capacity occupied by backups with retention 1 Month |
| 2 months | capacity occupied by backups with retention 2 months |
| 3 months | capacity occupied by backups with retention 3 months |
| 6 months | capacity occupied by backups with retention 6 months |
| 1 year | capacity occupied by backups with retention 1 year |
| >1 year | capacity occupied by backups with retention greater than 1 year. |
Cloud Tier
| Field | Value |
| Hostname | The FQDN of the DD server |
| Serial Number | The serial Number of the DD server. |
| Model | The Hardware Model of the DD server |
| ASUP Date | The dates of all ASUPs collected to list the Cloud Tier history. |
| Code Level | DDOS version |
| Pre-Comp Size (TB) | Logical Protected Capacity by Cloud Tier. |
| Post-Comp Used (TB) | Physical Capacity Consumed on the Cloud Tier after Data Compression. |
| Post-Comp Size (TB) | The Total capacity of the Cloud Tier including Used and Available Post-Comp capacity. |
| Utilization % | Percentage of Amount of space physically utilized from the Post-Comp Size. |
| Reduction (X:1) | Cloud Tier Total data reduction ratio after performing local and Global Compression. |
| 24 Hour Pre-Comp TB | Logical Capacity reported within the past 24 hours |
| 24 Hour Post-Comp TB | The Total capacity of the Cloud Tier including Used and Available Post-Comp capacity within the past 24 hours |
| 24 Hour Total-Comp (X:1) | The ratio of the total compression performed on the incoming to the DD Cloud Tier before being written finally to the DD. Global + local Compression. |
| Cleanable (TB) | The Cleanable TBs to be cleaned/reclaimed within the coming cleaning process. |
| 1 day | capacity occupied by backups with retention 1 Day. |
| 1 week | capacity occupied by backups with retention 1 Week. |
| 2 weeks | capacity occupied by backups with retention 2 weeks. |
| 1 month | capacity occupied by backups with retention 1 Month |
| 2 months | capacity occupied by backups with retention 2 months |
| 3 months | capacity occupied by backups with retention 3 months |
| 6 months | capacity occupied by backups with retention 6 months |
| 1 year | capacity occupied by backups with retention 1 year |
| >1 year | capacity occupied by backups with retention greater than 1 year. |
Mtrees
| Field | Value |
| Mtree Name | The Name of the Mtree. |
| Mtree Type | The type of the Mtree if DDBoost, VTL, NFS or CIFS or combination of any. |
| Replication Mode | The Mode of the replication configured on the Mtree level: Source (MFR) or Destination (MFR) or both. MFR is Managed File Replication and the mode elaborates either the Mtree is a source or Destination or both for MFR. |
| Total Pre-Comp (TB) | The logical Pre-compressed data per Mtree. |
| Soft Quota (TB) | Soft Quota assigned to the Mtree capacity |
| Hard Quota (TB) | Hard Quota assigned to the Mtree Capacity. |
| 7 Days Pre-Comp (TB) | The total size of Pre-compressed data per Mtree for the past week from the date of the ASUP. |
| 7 Days Post-Comp (TB) | The Total Size of Post-Compressed data per Mtree for the past week from the date of the ASUP. |
| 7 Days Reduction | The ratio of reduction reported per Mtree for the past week from the date of the ASUP. |
| 24 Days Pre-Comp (TB) | The total size of Pre-compressed data per Mtree for the past 24 days from the date of the ASUP. |
| 24 Days Post-Comp (TB) | The Total Size of Post-Compressed data per Mtree for the past 24 days from the date of the ASUP. |
| 24 Days Reduction | The ratio of reduction reported per Mtree for the past 24 days from the date of the ASUP. |
Mtree Activity
| Field | Value |
| Mtree | The name of the Mtree |
| Current Pre-Comp Size (TB) | The current size of the logical protected data by the Mtree. |
| Last Write Date | The ASUP date of the latest ASUP that has Logical Pre-comp capacity reported for that Mtree. |
| Peak Daily Pre-Comp (TB) | The Peak 24hrs pre-comp capacity reported by the Mtree from the collected ASUP dates. |
| Peak Write Date | The Date on which the Peak Daily Pre-Comp capacity is observed. |
| Mtree Type | The type of the Mtree if DDBoost, VTL, NFS or CIFS or combination of any. |
| Replication Mode | Replication Type set on the Mtree level. |
| 7 Day Total Reduction @Peak | On the ASUP date of the Peak reported 24 hours Pre-comp capacity, this the corresponding 7 Days Total Reduction Factor. |
| 24 Hour Total Reduction @Peak | On the ASUP date of the Peak reported 24 hours Pre-comp capacity, this the corresponding 24hrs Total Reduction Factor. |
Mtree total Pre-Comp Summary
| Field | Value |
| ASUP Date | The ASUP dates collected for analysis |
| Rest of the columns on that tab | List the total current Pre-Comp capacity per each Mtree at each ASUP date in TB. |
Active Pre-Comp by Mtree
| Field | Value |
| ASUP Date | The ASUP dates collected for analysis |
| Rest of the columns on that tab | List the Active Tier daily Pre-Comp capacity (Pre-Comp 24hrs) per each Mtree at each ASUP date. |
Cloud Pre-Comp by Mtree
Note: if there is no cloud tier configured, values on that tab would be N/A.
| Field | Value |
| ASUP Date | The ASUP dates collected for analysis |
| Rest of the columns on that tab | List the Cloud Tier daily Pre-Comp capacity (Pre-comp 24hrs)per each Mtree at each ASUP date. |
Active Post-Comp by Mtree
| Field | Value |
| ASUP Date | The ASUP dates collected for analysis |
| Rest of the columns on that tab | List the Active Tier daily (Post-Comp 24hrs) data per each Mtree at each ASUP date. |
Cloud Post-Comp by Mtree
Note: if there is no cloud tier configured, values on that tab would be N/A.
| Field | Value |
| ASUP Date | The ASUP dates collected for analysis |
| Rest of the columns on that tab | List the Cloud Tier (Post-Comp 24Hrs) data per each Mtree at each ASUP date. |
Active Tier 7 Day Reduction
| Field | Value |
| ASUP Date | The ASUP dates collected for analysis |
| Active Tier Overall Reduction (x:1) | Overall Reduction ratio over the past 7 days from the ASUP date per each Mtree |
| Rest of the columns on that tab | List of the Active Tier past 7 Day reduction ratio of each ASUP per each Mtree. |
Cloud Tier 7 Day Reduction
Note: if there is no cloud tier configured, values on that tab would be N/A.
| Field | Value |
| ASUP Date | The ASUP dates collected for analysis |
| Active Tier Overall Reduction (x:1) | Overall Reduction ratio over the past 7 days from each ASUP date per each Mtree |
| Rest of the columns on that tab | List of the Cloud Tier 7 Day reduction ratio at the day of the ASUP per each Mtree. |
Boost Clients
| Field | Value |
| Client | The name of DDBoost Client backing up to DD. |
| Idle | Boolean Flag if set to yes means no DDBoost connection started from that client now for backups. |
| CPUs | CPU cores at the DDBoost client |
| Memory (MB) | Memory reported for the DDBoost Client. |
| Plugin Version | The DDBoost version. |
| OS version | client OS version. |
| Application Version | The Type of Agent installed on the client from the application backup product. |
| Encryption | Boolean flag if set to yes means Encryption is enabled on the backup. |
| DSP | Boolean Flag if set to yes means Boost DSP mode is chosen on the backup write. Either DSP or Synthetic. |
| Transport | Type of Network Transport mode used for the backup. |
Current Alerts
| Field | Value |
| Alert ID | The ID of the Alerts issued. |
| Post Time | The time at which the Alert is issued. |
| Severity | The severity of the Alert: Error- Critical- Warning. |
| Class | The Type of the process issuing the alert: System Maintenance- Filesystem – Replication- Cloud. |
| Object | The exact object issuing the alert. Either Replication Context or Feature: DDBoost. |
| Message | The exact Alert descriptive message. |
Capacity Licenses
| Field | Value |
| License | The name of the capacity License. |
| Shelf Model | The shelf Model. |
| Capacity (TB) | The capacity licensed per each License. |
| Type | The Type of the License if Permanent or Evaluation. |
| State | The status of the License as Active or stopped. |
| Expiration Date | The Expiration Date of each License. |
| Note | Extra description on the License. |
Shelves
| Field | Value |
| Enclosure | The ID of the Enclosure. |
| Shelf Model | The Hardware Model of the shelf/Enclosure. |
| Shelf Serial | The serial Number of the shelf. |
| SAS Loop | The SAS disk ports connection which shows Disk Multipath Status. |
| Disk Group | The RAID Disk Group |
| Tier | Active or Cloud or Cache tiers. |
| Drive Size | The raw size of the Disk drive. |
| Drive Type | The type of the Disk drive. |
| DDOE (TB) |
Data Domain Operating Environment. This is a snapshot of the shelves and/or DAE's nested under a TLA in terms of their capacity in TiBs. Then its converted to TB.
|
Active Tier 24 Hours Icomp
| Field | Value |
| ASUP Date | The Date the ASUP was collected |
| Active Tier Overall Reduction | The Reduction ratio for the active tier. |
| Rest of the columns | The local compression ratio for the past 24 hrs for each Mtree Active Tier |
Cloud Tier 24 Hour lcomp
| Field | Value |
| ASUP Date | The Date the ASUP was collected |
| Cloud Tier Overall Reduction | The reduction ratio for the Cloud Tier on each ASUP date |
| Rest of the columns | The local compression ratio for the past 24 hrs for each Mtree Cloud Tier |
VTL Libraries
| Field | Value |
| Device Name | The name of the device media on the library. |
| Library Model | The model of the library |
| Serial | The serial number of the Library |
| Slots/Cap | Slots and Cap count. |
| Drive Model | The Drive Model |
| Drive Count | The number of Drives loaded in the Library |
| Initiators | The list of SCSI initiators connecting the DD to the Library |
VTL Pools
| Field | Value |
| Pool | The pool configured on the VTL Library |
| Status |
The current status of the VTL pool. Common outputs: RW Pool has normal read/write properties.
RD Pool is a replication destination.
RO Pool is read-only.
RLCE Pool is Retention Lock Compliance Enabled.
RLGE Pool is Retention Lock Governance Enabled.
RLGD Pool is Retention Lock Governance Disabled.
BCM Pool is in backwards-compatibility mode. |
| Tapes | The number of tapes on the VTL pool |
| Size (GB) | The total size of the pool in GBs. |
| Used (GB) | The used capacity out of the pool size. |
| Reduction (X:1) | Reduction ratio for each pool. |
CIFS Shares
| Field | Value |
| Name | The name of the CIFS share |
| Enabled | A Boolean flag set to yes if the CIFS protocol is enabled. |
| Path | The full path of the CIFS share on the DD. |
| Clients | The clients allowed to Read/Write/Execute on the share. |
| Max Connect | Maximum connections configured for each CIFS share. |
| Comments | Extra description for the CIFS share status. |
Snapshots
| Field | Value |
| Mtree | The name of the Mtree |
| Total | Total number of snapshots existing per each Mtree |
| Not Expired | The number of snapshots that are not yet expired. |
| Expired | Number of expired snapshots per each Mtree. |
| Min Expire (day:hh:mm) | The minimum expiry date set for the snapshots per Mtree |
| Max Expire (day:hh:mm) | The maximum expiry date set for the snapshots. |
Mtree and Dir Replication
| Field | Value |
| CTX | Replication Context Number |
| Mode | The type of Replication: Source or Destination |
| Source Host | The name of the Source DD server for Replication |
| Source Path | The full Mtree path to be replicated on that context |
| Destination Host | The name of the Target Replica DD server. |
| Destination Path | The full target Mtree path for the replication. |
| Enabled | The replication process is enabled and available to replicate data (yes) or disabled and not available to replicate data (no). |
| State | The status of the Context, example: Normal. |
| Error | The Error message reported for each context if there is a failure else “no error” |
| Compression Ratio | The ratio of the value of logical bytes ingested to the source to physical bytes actually sent to the destination over the wire. |
| Pre-Comp Remaining (GB) | The amount of pre-compression data not replicated. |
| Connection Status | The status of the connection if connected or Idle. |
| Synced-as-of Time | The time when the most recently replicated data on the destination was generated on the source. A value of unknown appears during replication initialization. |
| ASUP Time | The date and Time of running the ASUP report in terms of (Day Month <DayNumber> HH:MM:SS) |
Managed File Replication
| Field | Value |
| Mode | Source or Destination |
| Source Host | The IP or FQDN of the Source DD server. |
| Source Path | The Source Replicated Mtree Path/storage Unit. |
| Destination Host | The IP or the FQDN of the remote host |
| Destination Path | Remote storage Unit |
Consumption History
| Field | Value |
| Date | Listing the consumption daily for the specified report time interval |
| Available | The number of GBs Available capacity for usage. |
| Consumed | (Data + Repl + Ovhd - Cleaned) in GBs. |
| Data | The size of the Data Input to the DD in GBs (Protected data) |
| Replication | The size of the Replication Data Input to the DD in GBs. |
| Overhead | (Metadata + Fragmentation) in GBs. |
| Cleaned | The number of GBs cleaned on each completed cleaning. |
Legacy Performance Summary
| Field | Value |
| Date Time | Output is samples each 10 mins for the past 24 hours from the latest ASUP. |
| Read Throughput (MB/s) | The read Throughput data from the Data domain. Throughput Read data includes NFS, CIFS, DD Boost over IP and Fibre Channel, VTL, Replication, DD Boost-managed replication and optimized duplication. Read throughput from the Data Domain System in average mega-bytes per second |
| Read Streams |
The number of active streams assigned as read streams on the Data domain
|
| Read + streams |
reopened read streams in past 30 seconds.
|
| Write Throughput (MB/s) |
The write throughput data to the Data domain. Throughput Write data includes NFS, CIFS, DD Boost over IP and Fibre Channel, VTL, Replication, DD Boost-managed replication and optimized duplication. Write throughput to the Data Domain System in average mega-bytes per second |
| Write streams |
The number of active streams assigned as write streams on the Data domain
|
| Write + streams | reopened write streams in past 30 seconds |
| Write Global Compression (X:1) | The Data average Global compression ratio resulting from DD Deduplication. Consistently low compression values indicate data with poor compression rates being written to the Data Domain system. Poorly-compressible data can cause space shortages and performance issues. |
| Write Local Compression (X:1) | The Data average local compression ration resulting from DD Compression. Consistently low compression values indicate data with poor compression rates being written to the Data Domain system. Poorly-compressible data can cause space shortages and performance issues. |
| Replication In/out Pre-Comp (MB/s) | Replication pre-compressed (logical) throughput into and out of the Data Domain system. The value is always zero for collection replication. |
| Replication In/out Network (MB/s) | Network replication throughput into and out of the Data Domain system. Network traffic received into or sent from the Data Domain system for the purposes of replication in average mega-bytes per second |
| Replication In/Out Streams | number of incoming/outgoing replication streams |
| Active Mtrees (Read) | The number of Active Read streams per Mtree |
| Active Mtrees (write) | The number of Write Read streams per Mtree |
| Flags | Describe the current running process on the DD server now: |
| Average CPU | The current Average Used CPU percentage on the server. Average CPU utilization; the CPU ID of the most loaded CPU is shown in the brackets. |
| Max CPU% | The maximum CPU percentage reached that time interval. Max CPU utilization; the CPU ID of the most loaded CPU is shown in the brackets |
| Max Disk % | Max (highest) disk utilization over all disks; the disk ID of the most loaded disk is shown in the brackets (may not correspond to the ID used by 'disk show' commands. |
| Latency | Time taken to send and receive the data from the filesystem to kernel socket buffer. |
Boost Options
| Field | Value |
| Option |
- Authentication-mode: DDBoost authentication mode set. (one-way, two-way or anonymous). - Distributed-segment-processing: gives the status if enabled or disabled - Encryption: gives the status if enabled or disabled. - FC: Fibre Channel Protocol enabled or not - Global-authentication-mode: Authentication level set on the DD. - Global-Encryption-Strength: Encryption level set on the DD.(enabled or disabled) - IP Version: IPV4 or IPV6 chosen for the Managed File Replication - Low-bw-optim: Low Bandwidth Optimization to be enabled or disabled on the MFR, Managed File Replication. - Virtual-Synthetics: By default is enabled for any DD backup or replication process. |
|
Value |
The corresponding value for each of the above DDBoost variables. |
Boost OS Support
| Field | Value |
| Operating System | The type of each DDBoost Client Operating System running backup on the DD server |
| Value | The value of the DDBoost OS running on the client OS as DSP or NFS. |
NFS Exports
| Field | Value |
| Export ID | Numbering the Exports |
| NFS Exports | The name of the NFS Export on the DD. |
| Export | The exact path of the NFS export on the DD. |
| Clients | Clients allowed to write/read/execute on the NFS share. |
| Index | Unique index given to each share. |