How To Create a Report (PDF/PPT) in Optical Prime

Team Live Optics

Overview

The preferred method to interact with a Live Optics collector run is in the form of a project via the online Live Optics Viewer to take advantage of the dynamic nature of the Live Optics portal.  There still may be instances where a PDF report is still required to be generated.  This tutorial will walk through the steps needed to create a PDF report from an Optical Prime project. 

Prerequisite Information

  • Optical Prime project has been created from one or more completed collector runs.

 

Step 1:  Open project and click "Create Project Report"

From inside the Live Optics Viewer of a selected project, click the Create Project Report button on top of the project windows.  Please note that if you want to remove any of the devices or disks within a PDF or PPT report, the changes will need to be completed prior to entering the report creation module.

Create_Project_Report__with_arrow_.png

 

Step 2:  Select criteria and generate report

The Live Optics reporting module has recently added the ability to create PowerPoint reports in addition to PDF reports.  The options to create reports are very similar between the both formats and are listed for each file type below.  Once complete, click Generate Report to submit the request for processing.

   a.  PowerPoint Report

PPT_Report_Criteria.png

 b.  PDF Report

PDF_Report_Criteria.png

Step 3:  Download report

After processing has completed, the PDF/PPT report should be available for download.  In some browsers, the report will automatically download or prompt to specify the location where it should be saved.

Download_Report.png

Live Optics PDF Report Video Tutorial

 

 

Was this article helpful?
0 out of 0 found this helpful
Article is closed for comments.